Waterpump-Homemade

Today i Will share a Important technice by which you can Build a water-pump in your Home Easily.so Without wasting time lets Start...

At first you need two Bottle cap,try to get little bigger size So that you can build a bigger one.

Make a Hole in the centre of each Cap.you Can Use a Screwdriver and heat it.then Use it to make the holes.

Take a DC moter.

Attached one Cap with the Motor Using Glue.i will suggest you to Use Glue-Gun .

Take An Other Bottle cap.Try to choose a Soft one.then Cut a Round shape from that Cap.

Take Another cap,And cut the Side of the cap in half inch size.then Put it in the round cap using glue-gun.

Now attached it on the Top of the motor,using glue.

Put the Remaining cap on the top of it which was cutted at beginning.

Now make a hole in the side of the cap.this will out the water.

Then Place it on a Hard board. And Fixed it properly.Attached Battery and control switch on it.connect the Motor,battery and Switch by proper wirings.

Naw connect two pipe on both holes.one for pulling water and one for pumping.

Thats it.Now placed it wherever you want and turn ON the swicth to Pump water.

Tips: If pumper can Pump water, give Some water into the Pump first.

Then Just ON it and pump it.

So Friends How did you liked my Idea.i think it will many people. If you Like my article Please Inform me in Comment.Thank you...