Canon Pixma is a trusted brand that produces excellent printing, copying, and scanning results. It has been the preferred choice of maximum users worldwide. Canon Maxima B200 Error error was reported by Canon Maxima users. This is often a sign of a problem in the print head. It is possible that your Canon Pixma printer head has failed or needs to be repaired. Please follow these troubleshooting instructions or call us. Canon Printer Support Helpline To speak to the best Canon technical staff
* Reinstall ink cartridges.
* Take out the print head and clean all contacts with alcohol or another non-oily cleaner.
* Reinstall your printhead and ensure that the ribbon connector is securely connected to the print head.
* You can purchase a new Canon Print Head and either install it yourself or call a technician to get assistance
Below are five steps to fix Canon Pixma B200 errors. Follow them as they are listed.
5 Solutions to Resolve Canon Pixma Error Code B200
Other Canon Pixma models also have the error. These include mg6320. mp560. mx870. mx922, mg620. mx522. Below are steps to help you resolve Canon b200 Error mx922.
Solution 1: Unplug your power cord
First, unplug your power cord.
* Turn off the printer, unplug the printer, then move the printer head towards its middle. Finally, turn the printer back on.
* Turn it on again and wait until the printer head goes back to the left.
* Make sure to check if the error code was cleared.
Solution 2: Clean your Printhead
You can replace empty ink cartridges or clean the print head. Once the print head has been removed, thoroughly clean it using hot water. Keep the water running until the water is clean. This will eliminate any hardened ink from the print head. After drying the print head, you can either use a hairdryer or gently rub it with a lint-free cloth or paper towel.
Do not hesitate to call if you do not know what to say. Canon Printer Support Get assistance.
Solution 3: Fix any electrical error with a print head
Turn off the printer for about a minute, then remove any obstructions. Then turn it back on. If the printer doesn't work, you can inspect the electrical issue within the print head. Follow the step-by-step guide to fix this error.
* Power off
* Open the print headband.
* Power on
* Wait for print carriage to transfer to the right and then let it continue past halfway.
* The cover should be closed just before the print carriage reaches the left side.
* Keep the Printer on
* Make sure to confirm that the error is corrected
Solution 4: Reload the Printer Drivers
* Reloading the printer drivers is the next option. A corrupted driver can sometimes cause the B200 error.
* For at least two hours, turn off the printer and unplug the printer from the wall. Sometimes this will work.
Solution 5: Canon Pixma Customer Support
If none of the above steps solve your problem with the Canon Pixma Printer Print head, we can help you to resolve it all and give you 100% satisfaction.
Disclaimer provides remote technical assistance for peripheral devices and software. Unless otherwise specified, we are not affiliated with any third-party company. Although we may collect certain information from users, we never give it to any third parties. This information is extremely valuable to us. We do not endorse the use of trademarks, logos, or brands from third parties. We are sorry if you see any deceitful or misleading information on this website