Arlo cameras can be called the best security cameras that are being used in offices, companies, schools, and now even in various homes. These cameras are going to record everything in crystal clear images and will give you a great output. Although at times you will face an error such as the Arlo error code 4404.
Well, this is one error that you can face in your security cameras out of nowhere. Although the Arlo cameras are very reliable and are famous all over the world, still you can face an issue like this.
Well, most of you are going to wonder whether what is this error and how are you going to resolve it. There are some causes which is why you are facing this issue. When you face this issue, the cameras are going to stop working immediately.
When you are trying to update the firmware, then it will show you that the equipment is not going to update. This is the reason why you must have been facing this issue.
Well, in order to resolve this issue, you need to follow some steps so that ultimately you can update the firmware without failing or facing the Arlo Error Code 4404.
Troubleshooting steps for the Arlo camera error code 4404:
Power cycle the camera:
One of the best and the first step is to switch off the whole camera system. What you need to make sure of is that all the wires have been unplugged. After that let the system stay like that for a minute.
When you see that the minute is over, plug all the wires in, and then you see whether you are able to resolve the issue or not. If you are using wireless cameras, then the first thing that you need to do is to remove the battery from the camera and then wait for at least 30 seconds and then put it back.
Then wait for the camera firmware update to begin and then see whether you have been able to resolve the issue or not. If you are still facing the issue, then you must follow the next step.
Updating the firmware:
You might see that the update of the firmware is going to start immediately and automatically, you can perform it manually as well. Well, you need to visit the official website of Arlo and check out what updates are available or whether any updates are available or not.
If there is an update and it has not been installed on your system, then you need to download it and install it on your PC in order to update the firmware of Arlo. This will help you resolve the issue.
If you are still facing the issue, then follow the next step.
Take a look at the Wi-Fi signal:
Sometimes the signal strength is not up to the mark which is why you can face issues such as the Arlo 4404 error.
So, you need to check the signal strength that you might have been getting. See. whether or not, you are able to get any signals or not.
Reboot the system and then when it is switched on, you need to run a speed test. See whether it is enough for making the cameras run. If you are getting the proper signals and still are facing the issue then try on the next step.
These are some of the steps through which you can figure out the issue and then resolve it. But if you see that you are still getting the Arlo Error Code 4404 and are not able to resolve it or update the firmware, then you can get in touch with our experts.
They will provide you with the best tips and solutions!