If you are the one who is looking to enhance the security of your premises then Blink security cameras are an exceptional solution. One can see the footage sitting anywhere with the help of the live view feature via mobile phones. But, it happens sometimes that Blink Live View Failed.
If you have found that live view is failed in your Blink security camera, reset it for complete troubleshooting.
The Blink camera live view failed problem depends on many reasons ranging from dead batteries to broken connectivity. The good news is, we have a lot of troubleshooting tips for you to fix the issue.
We can understand that it is very frustrating when a security camera fails to record anything. Without any doubt, we know that it is user-friendly and reliable.
In this guide, we are going to know how to fix it when the live view fails in Blink cameras. For an immediate solution, dial the Blink Camera Customer Service Phone Number now.
Troubleshooting Blink Live View Failed Issue
If you have recently found that Blink Live View Failed, several different reasons could be responsible for the same. Either your wifi has stopped working or you have placed the sync module far from the wifi.
In addition to that, it is a must to use AA Lithium batteries. It is because these batteries have sufficient energy to power the device. It happens most of the time that Blink Camera Not Detecting Motion after using the alkaline or rechargeable batteries.
Moving ahead, let’s have a look at a few troubleshooting methods:
Blink Camera Red Light
The LED light on the Blink security camera says a lot about it. The blue light on the camera means that it is successfully recording the events. On the other hand, Blink Camera Red Light means it has been disconnected from wifi. To verify the signal strength, you can use the Home Monitor application.
To maintain a proper internet connection, the bar should have at least 3 bars in the camera and Sync Module.
Reset the Blink Security Camera
Resetting the Blink security camera is one of the best ways to troubleshoot the live view failed issue. You can also choose the option if you want to reset the Blink camera to original factory settings.
Here are the steps to reset the Blink camera:
First, you will have to find the reset button on your Blink camera. You will find the button under the back cover near the battery slot. If you are having Blink Mini, you will find the reset button below the camera lens.
Now, press the button with the help of a thin object such as a paperclip. Long press the reset button for 10-15 seconds.
At this point, the LED indicator will turn off and then start flashing red. This signifies that the device has been reset completely.
Resetting the camera may resolve the Blink Live View Failed issue.
Reset the Sync Module
If you are not in the mood to reset the sync module, try to resolve the Blink Camera Not Recording problem via restarting method. For the same, you just need to remove the power plug and other cables. Then, wait for at least 10-20 seconds and reconnect the power cable again.
To reset the Blink camera sync module, follow the steps mentioned below:
With the help of a thin pin-like object, press and hold the reset button until you will see a red light on the sync module. The reset button is given on the right-hand side of the module near the USB port.
When you see the Blink camera flashing red release the reset button. Now, you will see the flashing light like solid green and flashing blue.
If you see the green and blue lights on the sync module, it means the sync module is ready to be paired.
Conclusion
This article can be concluded on the point that a good speed internet is a must for security cameras. Several times, the security camera stopped working because of wrong placement and weak wifi connection. In this guide, we have arranged all the steps to resolve the Blink Live View Failed issue. In case need help reach Blink Customer Service Phone Number now or drop your query here >Securitycamhelpline for instant help.