Join 83,584 users already on

Fix Blink Camera Not Working Issue In 5 Easy Steps | Blink Indoor Camera

0 14 exc
Avatar for cynthiaparker1432
8 months ago

If you have found that your Blink Camera Not Working properly then you must check all the cables, wifi device, and network configuration setting properly. Apart from this, there could be a variety of reasons that could also be responsible for the same.

There is no doubt in the fact that you have installed one of the best and attractive looking security cameras at your place. But, just like any other technical device, sometimes these cameras start showing one or other errors.

In this guide, we are going to discuss why Blink Camera Not Detects Motion and what you should do to troubleshoot it.

Why Is My Blink Camera Not Working Properly?

Faulty cable connections, outdated internet connection, wrong router configuration, power outlet issue, and distance between the camera and router are some of the main reasons why your Blink Camera Not Working properly.

But, you don’t have to be worried about anything as we are here to help you with this. All the troubleshooting steps that we are going to mention below are well researched and effective. So, be ready to fix why your Blink Camera Not Recording anything.

5 Easy Steps To Fix When Blink Camera Not Working

Check whether all the cables are connected well or not, minimize the distance between the Blink camera and router, check the wifi properly if your Blink Camera Not Recording anything.

  1. Verify The Power Access: The very first and the foremost thing that you should do is to check the power access. It may be possible that the Blink camera is not getting the power and hence it has stopped working.

  2. Check All The Cables Properly: Loose cable connection is another main reason why your Blink Camera Connected but Not Working. Hence, do check all the cables, tighten them properly and replace the damaged cables with new ones.

  3. Check Your Wifi: It may be possible that your wifi connection goes down and hence your Blink Camera Video Stopped Unexpectedly. Check the speed of the wifi and contact your network service providers to fix it.

  4. Move Base Station Close To The Router: You may have placed the base station of the camera far from the router. This is why your Blink Camera Not Working and not recording anything. To fix the issue, you will have to move the base station a little close to the router.

  5. Restart The Blink Camera: From old times, we all use this troubleshooting method and believe that this is the best step to fix any technical glitch. Let’s try it here to fix the issue. So, turn OFF the camera, remove the connected cables and reconnect the cables after a while. Now, turn ON the camera and check if the issue still persists or fixed completely.

  6. Restart The Router: Let’s give your wifi router a chance to fix itself with the restarting method. So, turn it off, remove the cables connected to it, wait for a while and reconnect the cables. Turn ON the router and check the speed.

  7. Reset The Blink Security Camera: After applying the above-mentioned troubleshooting step, reset the camera if it is still not giving any response. Let us tell you that after resetting the camera you will have to set it up again. All the settings will be saved as default.


In this troubleshooting guide, we have discussed why Blink Camera Not Working and what we should do to fix this issue. One of the first things that you should do is to check the cables and wifi connection. Majorly, the camera stopped working because of these two reasons. The next time your device stops working again, you can try these mentioned steps easily.

$ 0.00
Avatar for cynthiaparker1432
8 months ago
Enjoyed this article?  Earn Bitcoin Cash by sharing it! Explain
...and you will also help the author collect more tips.