If your Blink Camera blinking Red light, it could be because of an Internet connectivity issue, Blink Camera Setup, or else, you need to reset your device now.
Without any doubt, it can be said that Blink cameras have gained so much popularity today. But, due to one or other reasons, which we will discuss in this article, the device sometimes stopped working.
If you are confused because of the red light on your Blink camera then here is your answer.
Why Is My Blink Camera Blinking Red?
Blink camera is not the only security camera that is showing you this error. It could be possible that it’s not the device faulty, you may have made some mistakes.
If your Blink Camera Not Working Red Light then it could be because of the below-given reasons:
Faulty Internet Connection: If your Blink Camera Blinking Red light then it simply means that your internet connection has been completely lost now. Hence, it is very important to connect the camera with the internet so that anyone can access it via the smartphone.
Blink Camera Setup: If you are doing the security camera setup then it is normal to see the red light on your security camera. Soon the red light would be replaced with the green light and then to solid blue once the network connection would be completed.
Solid Red Color Light: If the light still persists then you may need to reset the device for its better and complete functioning.
Fix Blink Camera Blinking Red Light Issue In 5 Steps
Check the internet connection, check motion detection settings and the batteries inside the camera in order to red light issues, or if your Blink Camera Connected but Not Working.
Internet Connection
If your Blink Camera Not Recording anything then you must check the available internet connection. It may be possible that your wifi goes down or someone has changed the password. So, do check the internet connectivity issue properly and fix it immediately.
2. Blink Security Camera Setup
Another time when your Blink Camera Blinking Red is the time we set up the device for the first time. The red light will blink for 3 or 4 times but it will then change to green and hence blue.
3. Motion Detection
Another time when the security camera blinks red light is when it is detecting any motion. But, you can check the recording to clear the doubt. If your camera hasn’t recorded anything for a long time, it means that Blink Camera Not Detecting Motion and is not connected to the internet.
4. Faulty Batteries
It may be possible that the batteries of the cameras get damaged completely. Hence, try to fix the issue by replacing the batteries with new ones.
5. Move Your Security Camera
You may have placed the security camera a little far from the router. This is the reason why your Blink Camera Offline and not working anymore. Hence, minimize the distance between the router and camera.
6. Reset The Camera
If still your Blink Camera Not Working then you may need to reset the security camera. A hard reset will fix the Blink Camera Blinking Red issue in a short period of time. You just need to press the reset button with the help of a thin paper clip located inside the reset hole.
Press and hold the button until you will not see the solid red light. Wait for a while and the process will be completed.
Conclusion
In this guide, we have told you all the steps related to Blink Camera Blinking Red light. We have discussed all the reasons and the troubleshooting steps for the same. A faulty internet connection is one of the main reasons behind the trouble. Hence, go through the steps until the security camera will not be started again.