It is very difficult to say why your Blink Camera Not Working and stopped recording. If you just found that your security camera is showing the error messages “Camera Failed” or “Thumbnailed Failed”, wait for a while and restart the system. Most of the time, power recycling resolves the problem quickly.
Other possible reasons why your Blink Camera Not Recording could be related to the wrong placement of the Security Camera or motion detection is disabled completely.
In this troubleshooting guide, we are going to tell you all the steps to resolve the Blink Camera Offline issue. If you are looking for an immediate solution then dial the given Blink Camera Customer Service Phone Number now i.e +1-800-983-7116.
Why is My Blink Camera Not Working?
It sometimes happens that Blink Camera Video Stopped Unexpectedly because of various reasons. Sometimes, the Blink Camera Not Detecting Motion because of a weak or no signal in the internet connection.
It may be possible that you have not connected the cables properly. Or else, the base station is placed too far from the router. Don’t forget to check the motion detection setting of your security camera.
No matter what is the main reason that your Blink Camera Blinking Red, we will help you to fix the issue completely. You can also ask our technicians to help you, just dial the given Blink Camera Customer Service Phone Number now.
How to Fix When Blink Camera Not Recording Anything?
Without any doubt, it is very clear that security cameras are very helpful in today’s time. No matter whether it’s your workspace or your home, security cameras especially the Blink security cameras keep an eye on your place for safety purposes.
If you have found that your Blink Camera Not Working then do follow the steps mentioned below.
Check All the Cables Properly: All the cables that are either connected to the router or security camera should be tightened well. It may be possible that you did not connect the wires tightly or any one of them is damaged.
Internet Connection is Not Working: Most of the time, the issues like Blink Camera Connected but Not Working, Blink Camera Not Working Red Light, or Blink Camera Offline occur because of a faulty internet connection. Hence, you must verify whether your wifi is working or not.
Move Base Station Near the Router: You may have placed the base station far from the router. This could be one of the main reasons why your Blink camera Not Working. So, move the base station close to the router immediately.
Restart the Router: Restarting the technical device often resolves the issue in a quick time. So, turn OFF the router and remove the power plug from the wall outlet. After 30-40 seconds, reconnect the power plug again. Check now if your Blink camera has started recording or not.
Restart the Blink Camera: Try to fix the issue by restarting the Blink security camera. You just need to follow the same procedure mentioned in the above steps. Once the camera is restarted, check if the issue gets resolved or not.
Reset the Blink Camera: Reset your Blink camera if the issue still has not been resolved. You just need to long-press the reset button until the camera will not restart again. All the settings will be changed to defaults once the reset process is completed.
Conclusion
This article can be concluded on the point that you must take care of your device properly. A number of issues could be responsible for why your Blink Camera Not Working properly. We have mentioned all the troubleshooting methods in this guide. If you still want to talk to our expert then dial the Blink Camera Customer Service Number now.