If you are concerned about the Arlo Camera Not Recording problem, you must check your internet connection. Apart from a weak wifi connection, a number of other reasons could be responsible too. It could be the distance between the router and base station or the outdated wrong setup of the camera.
It is sometimes hard to find the main reason. After complete research, we have found troubleshooting methods. For more help, dial the Arlo Customer Service Phone Number now.
Why is My Arlo Camera Not Recording?
You must check the internet speed, motion detection settings, and all the cable connections if your Arlo Camera Stopped Recording. Apart from that, don’t forget to sync the camera again. It may be possible that you have not done the setup properly.
All of these reasons could be majorly responsible for the issue. But, you don’t have to worry as we have already found some best troubleshooting methods for you.
How To Fix When Arlo Camera Not Recording?
If you have found that your security camera has stopped recording and gets frozen completely, here are the steps you can try to resolve the issue.
Check the Arlo Camera Setup
It happens several times that a user faces the issue of the Arlo camera not recording because of the wrong camera setup. Although the Arlo Camera Setup is quite easy, if you are a new user, you may have to face minor issues.
For more help, reach the Arlo Phone Number. Our team of technicians is round the clock available to help you.
Do Check Configuration Settings
It may be possible that you have made any mistake while doing the camera configuration setting. Hence, do check the settings properly and change them if needed. You can also reset the camera to factory defaults to fix the Arlo Down issue.
Sync the Arlo Camera
It may be possible that your Arlo Camera Not Working anything because of the syncing issues. Hence, you would need to perform immediate troubleshooting.
Check the Motion Sensitivity Settings
It may be possible that you have set the motion detection settings to low. This is the reason why your Arlo camera Not Recording anything. Don't set the settings too high or low, set it to medium so that it can easily detect the motion.
Verify All the Cable Connections
All the cables that are connected to the Arlo camera should be tightened well. Sometimes, it’s the loose cable connection that is responsible for your Arlo Camera Not Recording When Motion is Detected. If you have found any damaged cables then replace them with the new one.
Enable the Notifications
It may be possible that your security camera is working properly but you may have forgotten to enable the notification. Hence, open the settings of the camera and check if you have enabled the notifications or not.
Restart the Arlo Security Camera
Oftentimes, you can easily resolve the technical glitches with a quick restarting method. So, restart the camera with the help of the below-given steps to resolve the issue:
Firstly, turn OFF the camera and remove the power plug from the wall outlet.
Now, wait for at least 10-20 seconds and reconnect the power plug again.
Turn ON the camera and check if it has started recording or not.
Reset Arlo Camera to Factory Defaults
After applying all the steps mentioned above, if still your Arlo Not Recording All Motion then reset it. Resetting the camera will delete all the saved settings. Hence, you would need to set up the Arlo camera again.
Conclusion
This article can be concluded on the point that a number of reasons could be responsible for the Arlo Camera Not Recording issue. In this guide, we have mentioned all the reasons and the troubleshooting methods to fix the issue. If you need any kind of help, dial the Arlo Phone Number now. You can also visit securitycamhelpline, drop your query and get instant support.