Router’s Login – 192.168.1.1

192.168.l.l is the IP address used by many routers and modems as the default gateway. 192.168.1.1 The address can be used by users to gain administrator access to the router and to configure the router and their network.

192.168.1.1

192.168.0.1

How to login to 192.168.1.1

• Access from any computer connected to the network with the browser and enter the following address in the bar of your browser and press the ” Enter ” key on the keyboard, as shown: go to http://192.168.1.1 or type 192.168.1.1 into the address bar of your browser.

• To log in, enter the username and password of your device.

• Once there, you will see the configuration interface of your device, where you can, worth the redundancy, configure and view every aspect of it, such as security, type of connection, IP address leaks and others.

I have forgotten the username and / or password of my router. How do I recover them?

Solving these types of problems is currently very simple, since by default these artifacts bring with them a username and password, which are generally always the same, the only thing that varies in this case is the manufacturer. So not if you do not remember which is the entrance to the protected interface of the router, you can search on the back of the device or, failing that, on the internet. 192.168.1.1 

 If I have forgot the username and password

The router’s settings web for security is protected by a username and password. Possibly for one reason or another it has been forgotten or lost, and also perhaps because the owner does not even know that they have predetermined credentials. However, there are always tricks to be able to solve and access the page, even if this data is not remembered. Some of the ways are as shown below:

How to configure the router via IP address

• Located on the label: At the bottom of the device there is a label, there you will find all the information about it, such as the model, brand, internet speed and the username and password so that you can enter the configuration. The keys are normally basic and are usually admin, 1234, 123456 or similar, depending on the brand.

• Look in the manual: Like any other electronic device, at the time of sale, they come together with an information manual with all the specifications of the device. In this case, you can search in the different sections for the corresponding username and password. If, failing that, it does not come; you can enter technical assistance on the manufacturer’s page with the model of your device and find out the access.

Access the database: To recover your router’s username and password, you can use the following web address:  http://www.routerpasswords.com/, which will take you to the router’s password database. In this you will find the most commercial brands of wireless devices. At this point you must select the manufacturer and then click on “Find Password” or “Find Password “.

Last option: Reset the router to factory settings

If you previously manually changed the default data and you do not remember which one you entered, and you already tried to enter through the previous steps and did not get a response, you will only have to do one more step. To do this you will have to reset the device, but not in the usual way by turning it on and off. To recover the factory settings, you will have to do it manually with a small button that is located on the rear panel, exactly where all the connections of this are located.

In this piece of information we give details what to do:

• With the appliance turning on and with the help of a long, fine-pointed object, press the reset button located behind the device.

• Hold it down for a few seconds until all the lights come on. This will indicate that the router has been reset.

• Once this is done, all the configurations that were made to the equipment will be eliminated. But you will have managed to access the interface by means of the default username and password.

Which allows you again to adapt all the settings?

How to know what is the IP address of our router in Windows?

If you want to access the router’s configuration page to make changes, but you don’t have the IP address and you don’t know how to obtain it, in this step we explain how to find it. It is important to note that in Windows this is known as “Default Gateway 192.168.1.1 “.

• Go to the “Start” menu followed by “Control Panel.”

• In the “Network and Internet” category, click “View network status and tasks.”

• In the “Basic network information and settings and connections” window, locate and click on the name of your network.

• This will open a window called “Wireless Network Connection Status”, where it will display information about your device. In it a “Detail” option is displayed, click on it.

• Finally, look for where it says “Default gateway”. This way you will be able to know the IP address of your router.

Click Here to know in detail about Different Router setups– TP-link, Asus, D-Link

Top Brands user login passwords for “192.l68.1.1”

BrandUsernamePasswordUsageASUSadminadmin140 xASUSrootadmin1 xActiontecadmin–3 xActiontecadminpassword1 xActiontecadminunits serial number2 xCiscoadmin[empty]1 xCiscoadminadmin13 xCiscociscocisco14 xComtrendadminadmin1 xComtrendroot123455 xD-Linkadminadmin2 xEdimaxadmin12341 xHuawei–admin1 xHuaweiAdminadmin1 xHuaweiadminadmin7 xHuaweiadminsuperonline / vdf.05421 xHuaweiuseruser3 xHuaweivodafone/adminvodafone/admin12342 xLenovoadminadmin4 xLinksys[empty][empty]1 xLinksys[empty]admin67 xLinksysadminadmin33 xMotorolaadminmotorola3 xMsiadminadmin2 xNETGEARadmin12343 xNETGEARadmin[empty]5 xNETGEARadminpassword71 xTP-Linkadminadmin47 xTRENDnet–admin1 xTRENDnetadminadmin5 xUSRoboticsadminadmin2 xUbiquitiubntubnt16 xWDadminpassword6 xZTE1admin0ltecl4r01 xZTEadminadmin3 xZoom–admin4 xZoomadminadmin1 xZoomadminzoomadsl3 xZyXEL–123430 xZyXELadmin–1 xZyXELadmin123430 xZyXELadminadmin2 xZyXELuser12341 x.