We are pleased to announce you that we have bought our very own card printer thanks to all our Flipstarter backers.
This achievement is a success because of you: http://flipstarter.satochip.io/
We chose the HID Fargo HDP6600 dual-side with the laminator module.
This kind of printer will allow us to offer -on demand- and -customizable- Satochip hardware wallet.
In a near future, we will enhance our webshop with a card customization module to allow everyone to create and buy a custom Satochip hardware wallet.
Thanks to Flipstarter, we will offer the first customizable hardware wallet in the world !
How to claim your pledge prize
Backers who have successfully pledge to the Satochip Flipstarter can now claim their prizes !
Please follow this procedure :
Sign a message with the address used to fill the Flipstarter
Send an email to info[@]satochip[dot]io with the following information :
Your pledge BCH address
The amount of the pledge
The message to verify and its signature
The prize(s) you want to claim (see the table below)
If needed, the image file you want to see printed on the Satochip card
A valid postal address
If you don't want to associate a postal address with you Bitcoin Cash address, you can claim a coupon code to be redeemed on our website. Please kindly note that the card customization module will not be ready until the end of the year. So if you really want a custom Satochip, either fill in the above form or be patient.
Here is a reminder of the pledge/prize table :
0.05 BCH -> The official Satochip card reader.
0.10 BCH -> A Satochip card from the First Edition or the SLP card.
0.15 BCH -> A unique Satochip hardware wallet card with your own picture/image.
Printing specification
The Satochip card customization consists of a full image impression on the front face (chip) of the card. The back will remain unchanged and will display the Satochip logo.
We encourage you to provide us a good quality image (at least 215px x 342px) along with a good resolution (min. 72 DPI). Bad picture quality may result in a bad impression. We cannot be held responsible for poor print quality.
The image can be a photo or your own creation with texts, logo or any other graphics.
Satochip card format respects the ISO/CEI 7810 - ID1 - international standard with a size of 53.98 mm height and 85.60 mm length.
WE WILL NOT PRINT any images of pornographic nature, child nature, containing suggested or proven violence, hateful characters or symbols or any other element that we consider offensive. Be sure to have the needed rights to print your image.
WE RESERVE THE RIGHT to inspect all the images and to refuse printing at our sole discretion.
If you have any question or just want to talk about Satochip products, feel free to send us an email or join us on our social media.
Follow us on Twitter: https://twitter.com/SatochipWallet
Join our Telegram: https://t.me/Satochip
Website: https://satochip.io
Shop: https://satochip.io/shop
