@mc5punk 29 March 2025 more from that month

Creating a bag with recycled materials We are back with our recycling section in which we will see next the elaboration of a small bag with pants fabric; and on the other hand, the extraction of the fly of a Jean. This is a somewhat slow process because we have to take into account that this work was done 100% by hand. If in your case, you have a sewing machine, be sure that you will do it in a few minutes. Now, let's move on to see the step by step in this tutorial. 1- we start with the extraction of the fly of an old disused trousers, for this we can use a cutter. You just have to go depending on each thread that joins it to the pants.

2- we go on to take the measurements that will shape the bag, these measurements must be equal to the fly (in this case they were 16 x 16 cm), both lengthwise and widthwise.

To mark the measurements on this kind of fabric, a Prismacolor colored pencil was used.

3- having the fabric with the respective measurements we attach it to the fly.

We sew on the sides.

We turn from the inside and get the following result.

And that's it! We are done with our work 😃 What do you think? I hope this will motivate you to do it. And remember you can comment at the end of this post, I'll be reading and giving you feedback. I also appreciate all the support received from all of you. Without more to say I'll see you in a next installment. Until then 😎👍. **Materials** used - Jean trousers; - Cutter; - Scissors; - Prismacolor colored pencil; - Rule; - Thread and needle. **Source of the** images Images captured with my Amazon Fire 8 tablet.