@DarthAzrael 6 December 2022

Random Usenet post of the day: --- Subject: Re: CPU Temps Again From: "Flow" <flowing@zonnet.nl> Date: Sun, 20 Oct 2002 23:01:40 +0200 Newsgroups: alt.comp.hardware.microprocessors.amd, alt.comp.hardware.overclocking.amd, alt.comp.periphs.mainboard.soyo References: <pABs9.185111$121.5007569@twister.austin.rr.com> Xref: archiver1.google.com alt.comp.hardware.overclocking.amd:121208 alt.comp.periphs.mainboard.soyo:37447 Your on the right track,also bear in mind that the psu gets pretty hot heating up your case,you can avoid this a little bit with psu+2 or 3 fans in it.Try to find a middle road between cooling and noise,50C. cpu temp at full load is reasonable but to get cooler noise increases..................................... "John Nichols" <jnichols2@austin.rr.com> schreef in bericht news:pABs9.185111$121.5007569@twister.austin.rr.com... > I just upgraded my system from 1.0Ghz Athlon to XP2000+, now temps are lower > than my old one. > I'm using the same case and case fans (front and rear). > I only changed the motherboard, memory (PC133 SDRAM to PC2700 DDR) and CPU. > > The 1.0Ghz was on a Asus A7V board, CPU temp 59-60C, and case felt pretty > cool. > The XP2000+ is on a Soyo KT333 Dragon Lite, CPU temp 48-49C, and case feels > pretty warm. > > I take this to mean the XP2000+ heatsink and fan are removing more heat than > the 1.0Ghz? > Am I on the right track, or does someone have other ideas? > > > John Nichols > > --- https://www.megalextoria.com/usenet_archive/alt.comp.periphs.mainboard.soyo/msg19684.html