Resin keychain With letter A Hello everybody!! Today i am so excited about my first article on this platform. I am a resin artist. Today i have made the resin letter keychain with the letter A. This letter is for one of my beloved friend.

___ Materials *Epoxy Resin Liquid and Hardner [1:2] *Red mica powder *Gold flakes or gold foil *keychain and ring *Inserting jumping *Resin mixing molds ___ Procedure First I have taken the ratio of epoxy resin one spoon for the hardener resin and two spoons for the epoxy resin liquid. There are different ratios in the resin but I prefer to use 2:1. Because it's very easy to use and mostly the measurements can be taken easily.

After mixing the resin in the cup. I have used red color in it. And the color i have mixed very thoroughly so there will not be any clotting and solids. So it's very good to mix with all of the energy to get the better results.

After mixing half of the liquid with red colour the other half I have used gold flakes in that. Those flakes or foils looks beautiful more than the glitter.

After that I have started to pour my resin liquids both of the colours in the letter A. For the upper part of the letter A I have decided to pour pink colour. And for the bottom part I had decided to use the gold flakes as I am supposed to make the hole for the drill jumping.

I have kept this in the mould for more than 24 hours because its epoxy resin its not the UV resin so if we use epoxy in it should be keep for more than 24 hours but UV resin needs less than an hour while using the UV lamp. After getting a dry I have d molded it from the mould.

After that I have attached the key ring and the hole I have done using the mini electric drill. And here is the final result of my resin keychain.

I hope you all like it . Keep supporting. I will be back very soon. Bye.